Featured Project #2

I wanted a tufted headboard, but they were too costly. So, I looked at the materials to make one. I reused interior slab doors and bought some 2-inch foam, quilting batting, and chenille fabric. I cut the door down to the desired width for a queen headboard (66-inches), glued on the foam, covered it with batting and stapled it down, and then attached the chenille. I used one and one-eighth inch covered buttons, threaded with fishing wire through pre-drilled holes in the door, and secured them with flat buttons on the back.

To mount the headboard I bought a Pop-Toggle screw-and-anchor kit (from Home Depot) that holds up to 40 lbs. I drilled holes in the wall at the desired width for the anchor, and drilled corresponding holes on the back of the headboard. Then I just hung the headboard on the wall like a picture.